This article describes the steps necessary to add multiple Display Cards in a form within Semarchy xDM.
More details about Display Cards can be found here |
Configuring Multiple Display Cards in a Form
1. Create a display card
2. Navigate to forms
3. Under form open the form object
4. Select the FDN attribute you will add to the form
![](https://static.t-cdn.net/5ef1e3639f2bb04fc7204631/posts/5f101f26a6883d4aa55bc62f/5f101f26a6883d4aa55bc62f_26779.png)
5. Drag and drop the FDN attribute and then navigate to the properties tab below
6. Select Display Properties
![](https://static.t-cdn.net/5ef1e3639f2bb04fc7204631/posts/5f101fe4b1587f36a8f089d8/5f101fe4b1587f36a8f089d8_39217.png)
7. Under Display Properties select the … to add a Display Card
8. You should see a list of display cards that are available for this form
![](https://static.t-cdn.net/5ef1e3639f2bb04fc7204631/posts/5f102010a6883d4aa55bc645/5f102010a6883d4aa55bc645_89649.png)
9. Repeat steps 1-8 to add additional display cards.
![](https://static.t-cdn.net/5ef1e3639f2bb04fc7204631/posts/5f10205529f95f6df1f50d08/5f10205529f95f6df1f50d08_72936.png)
Once the App Builder is saved, you can navigate to the UI and see the four display cards created in the form.
![](https://static.t-cdn.net/5ef1e3639f2bb04fc7204631/posts/5f102380e48a47785f8ea8b5/5f102380e48a47785f8ea8b5_48021.png)